top of page
Can-Am X3 Bombproof Shock Brace Mount - Ct Race Worx

Can-Am X3 Bombproof Shock Brace Mount - Ct Race Worx

Can-Am Maverick X3 Bombproof Front Upper Shock Mount by CT Race Worx.

CT's front upper shock mount brings a great look and added strength to the front of the X3.

The stock front upper shock mount on the X3 is not a true double shear, meaning that the bolt that mounts the shock is not supported on the front and back side. This puts a tremendous amount of force and leverage on the bolt and the frame.  The rear supports all the force that the suspension throws at it and its less than ideal.  On hard impacts or front bottom outs it will try to push the factory shock mount up and back.

The brace bolts on top of the frame and is held on with 4 bolts.  The sheet metal bracket is made from a heavy gauge grade 50 steel that is very rigid and strong, created for bracing and gusseting.  The vertical sheet metal pieces tie our billet bracket into the top of the frame.  The routing of the radiator hoses and wiring stay the same as it did from the factory and does NOT require the radiator hoses to be removed.  There is also nothing to restrict the exiting airflow behind the radiator. 

The 6061 billet shock mount was designed to mimic the factory bracket.  They wanted to support the bracket with the brace that runs down to the chassis as far on the outside as possible.  The further out it was mounted, the more control you would have over the leverage of the bracket trying to twist and move vs having a center based mount.  The sheet metal lower brace bolts to the billet aluminum upper piece via (2) 1/2" grade 8 bolts.  This will also be the same place that the optional limit straps will be connected.  The radiator mounts stay in the same place as the factory parts which gives you a very strong and extremely clean mounting setup that holds factory dimensions.

This is KOH, XC and TORC Proven to add strength and rigidity.

Key features:

  • Limit straps can be added
  • Shock reservoirs can be ran in the stock position flipped in or flipped out
  • Radiator lines do not have to be removed to install this kit
  • Lower brace design is the most rigid on the market and doesn't restrict exiting airflow
  • 100% bolt on

INSTRUCTIONS

    $315.00Price

    Related Products

    bottom of page